FABRICATION RELEASE CHECKLIST
[ ] Units: Metric, 0.001, Millimeters
[ ] Every panel = measured plywood thickness; scale applied
[ ] Finger joints mesh at all corners
[ ] Openings, servo pocket, wire holes, mechanism slot cut; cutters hidden and kept
[ ] Laser SVG true size, checked in LightBurn, coupon tested
[ ] Figure: flat base, >= 1.2 mm FDM / 0.8 mm resin, 3.2 mm mounting hole, sliced
[ ] Mechanism animation: full cycle, no collisions
[ ] Circuit plan: every device, pin, route; power budget within supply
[ ] Assembly drawing: third-angle views, exploded view, title block
[ ] Parts list by machine
